Advantages and Disadvantages of Industrial Rubber Products

• About the advantages and disadvantages of industrial rubber products, Industrial rubber products are used to make many things, such as all kinds of equipment.
  There are many advantages that industrial rubber products have, but the fact that they are not so expensive is also attractive.
  Depending on the type of rubber, the cost will be high, but basically it will be cheaper than materials other than rubber.
  There are countless types of rubber such as silicone rubber, urethane rubber, nitrile rubber, hypolon rubber, and hydrin rubber, which is an advantage of industrial rubber products, and it is possible to create rubber with characteristics according to the environment in which it is used. is.
  It is easy to use on a case-by-case basis because you can use heat-resistant rubber for parts that tend to get hot due to heat, and use rubber that has cold resistance for parts that get cold. ..
  There are other merits as well, but thanks to these advantages, industrial rubber products are probably used in various places.
  You might think that there is only one type of rubber, but there are many different types, and research and development is constantly being carried out, and new types are appearing.
• Are there any disadvantages to industrial rubber products? While industrial rubber products have many advantages, they also have some disadvantages.
  Having many characteristics depending on the rubber material is also a great strength, but depending on the characteristics, it is not possible to produce the maximum effect unless it is used properly.
  And although there are industrial rubber products with strong durability, it is natural that they are rubber, so there are limits.
  This is the only disadvantage that can be associated with it, so it’s basically a wonderful material, and if you don’t make a mistake in using it, it will show great power.
  The fact that industrial rubber products are used in many places today is due to their enormous benefits.

What Is A Rubber Telescopic Joint Single Sphere?

Rubber telescopic joints Single  spheres  are flexible connectors made of natural or synthetic elastomers, fabrics and, optionally, metal reinforcements. It is designed to absorb the vibration and noise of the pipeline. Various rubber materials are selected according to the type of fluid and usage conditions.

Expansion Joints and Displacement Absorption Fittings

Expansion joint

Expansion joints are pipe joints used to absorb “expansion and contraction in the pipe axis direction” caused by “temperature changes” in pipes for steam, ventilation, gas, water, oil, etc. 1. Sleeve type expansion joints , 2. Bellows type expansion joint, 3. Bend joint.

 Sleeve Type Expansion Joints:

There are two types of sleeve type pipe joints, “single type” and “double type”, but since the “expansion and contraction amount” can be very large, “single type” is often sufficient. There is a “sleeve type expansion joint (HASS 003)” as a single standard. The “sleeve” is a model that expands and contracts by sliding on the “packing part”, and since it has become possible to produce high-quality “packing”, products with features such as high temperature and high pressure, long life, and robustness are commercially available.

Rubber Displacement Absorption Pipe Fitting

Since this joint can be expected to have “elongation” due to the characteristics of “rubber”, the “retraction amount” is smaller than that of the “metal displacement absorption pipe joint”, and the reaction force is also small.

Since the inner surface is continuously smoothed, it can also be used for drainage of sewage. In addition, a large amount of displacement can be obtained, and it is applied to “seismic isolation buildings” and the like. It is difficult to use in “hot water supply piping” because the deterioration of rubber is promoted by “oxidizing action” and “oxidation” is promoted by heat and stress.