When dealing with digital files, hardware issues are not our main concern. The problem usually begins when we spend a lot of time and effort trying to achieve that beautiful piece.
Brands usually do not like to use compatible inks. The printer is very affordable and comes preloaded with a half-load cartridge that rarely prints. Later, the real business is in ink and prices are often abused. That’s why compatible inks are very interesting. Compatible ink cartridges should always be an option to consider.
Compatibility issues can occur with compatible cartridges. Most of the time, they are recurring problems, and once you know them, they are very easy to solve.
For example, in the case of the Brother printer we are talking about, it can make the printer useless, but it has certain general problems that are really easy to solve. Sure, the main problem is trying compatibility and not coming back, but the notification that the cartridge is not recognized. In this way, we consider it incompatible and revert to the original ink.
But there is a solution to this. We will advise and explain in detail how to solve the problems that occur when printing NTT toner for that purpose. In this article, JordiR describes how to make a Brother printer recognize compatible cartridges . In this way, different types can be used Brother cartridges and inks
Table of Contents
Does Your Brother Printer Recognize Compatible Cartridges?
If you have a Brother printer Learn how to prevent your Brother printer from displaying the following message if a compatible cartridge suddenly becomes unrecognized. “Cartridge not recognized” step.
The First Step is to Check the Brother Cartridge Chip
The chip stores all the information about the cartridge. If an error occurs or it works properly, there are ink levels, impressions, etc. that usually cause the printer to not recognize compatible cartridges.
The chip is in good condition for the cartridge to be fully functional. In short, mishandling can result in irreparable damage because it is so delicate.
I Will Explain How to Replace the Tip
On the one hand, you need to make sure that the error is not that the chip has come off . In this case, you just need to fix it again, that’s it
On the other hand, we can replace the cartridge, but if you don’t want or don’t want the time or money to buy another, or if you’re a little skilled, you can replace the chip yourself.
Benefits of using Compatible cartridges, these chips are sold separately , unlike the original, which requires the entire cartridge to be replaced.
On the one hand, you need to release the chip in bad condition before you can place a new chip . Use the knife carefully around the tip. Note that some tips are secured with plastic bosses. If you don’t have it, you’ll have to use a little quick-drying glue that you’ll need to put very carefully on the edge of the tip so that you can hold it ..
If the Tip is Dirty
The tip may simply be dirty with ink residue from the print. This is just a matter of cleaning with gauze . Moisten the gauze with rubbing alcohol or water, wash it, and then dry it with another non-moistened gauze. If that’s all the cartridges should work perfectly, then if it doesn’t work, you need to make sure that the printer contacts are also clean, in which case you also need to proceed with cleaning.
Reset Poor Quality Counters or Chips
Other Problems The Printer Does Not Recognize the Compatible Cartridges Used The chip quality may be poor, that is, changing compatible cartridges and looking for a better cartridge that can print without problems. Should be considered.
On the other hand, you may need to reset the printer counters, which may not work properly and display an error even though the cartridge is completely full and has spare ink.